Outdoor Patio Furniture Sets

The Classic Accessories generator cover keeps dirt, debris and weather out of your generator motor for use in storage or on the job. Coated for maximum water resistance and repellency, the heavy-duty fabric won't shrink or stretch, and will protect your generator from rain, snow, sun damage, dust, tree sap and birds. An elastic shock cord in the bottom hem provides a slip-on, custom-like fit, and installation and removal are quick and easy. The design includes a handy integrated storage sack. This large cover comes in black and fits generators measuring 35-by-24-by-30-inches (LxWxH) and up to 7000 watts.

The Reliance Controls 30 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit includes an NEMA L14-30P inlet plug, six knockout holes, and push-in wire connections. Using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty.

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty.

OIL FILTER BLACK 75 LONG

20' Power Cord, 7500W Running Generator Maximum, 30A@125/250Vac Maximum Generator Input, For Use With Reliance Manual Transfer Switches, Transfer Panels & Power Inlet Boxes, NEMA Configuration L14-30, UL Listed.

NEMA L14-30 male power cord plug. Max. generator running watts is 7500. Max. generator input is 30A@125/250 Volts. Plug is UL listed, impact-resistant. 5-year limited warranty. U.S.A. Connector Type: Male Plug, Amps: 30, Volts: 125 / 250, Watts: 7,500, UL Listed: Yes

Product Features: Amperage: 30 Amp Voltage: 125/250 Volt NEMA: L14-30P Pole: 3 Wire: 4 Cord Range: .595 - 1.150 Wire Gauge: 14-8 AWG Blades/Contacts: Solid Brass Body Material: Super Tough Nylon Assembly Screws: Steel, Zinc Plated Color: Black-White Standards and Certifications: UL/CSA

NEMA L14-30 power cord connector. Max. generator running watts is 7500. Max. generator input is 30A@125/250 Volts. Plug is UL listed, impact-resistant. 5-year limited warranty. U.S.A. Connector Type: Female Plug, Amps: 30, Volts: 125 / 250, UL Listed: Yes

The Reliance Controls single-circuit 15 Amp furnace transfer switch is designed for use with generators with 15 Amp power outlets. It controls a single circuit, such as a forced-air furnace, in the event of a power failure, connecting it to a portable generator. The attached 18-inch flexible aluminum conduit is pre-wired and allows the unit to be easily connected at the circuit breaker panel, the furnace, or at any point in between. It can be used on any 15 Amp 120-volt forced-air furnace circuit. Simply plug a standard grounded extension cord into a power outlet on your generator and into the built-in plug on the transfer switch. It includes an indicator light, which illuminates the area around its switch during a power outage. This unit is UL listed and is covered by a 5-year limited warranty.

50 foot long Generator power cord for up to 7500 Watts uses L14-30 Socket on one end, L14-30 Plug on the other. Cord Cable feature stranded bare copper conductor, separator, CPE Rubber or EPR insulation, suitable fillers, separator and CPE jacket. Cord has a temperature range of -40°C to + 60°C. Cord is designed for use in portable tools and equipment. Cord may also be used for portable appliances, small motors and associated machinery. Cord features excellent resistance to oil and moisture, good tensile strength, elongation and aging characteristics, high flexibility, excellent abrasion resistance.